hostprinting.blogg.se

Bad checksum corrupt save snes9x mac
Bad checksum corrupt save snes9x mac







bad checksum corrupt save snes9x mac

Locate the partition on which the bad block resides.

BAD CHECKSUM CORRUPT SAVE SNES9X MAC OFFLINE

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUEĥ Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0ġ96 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0ġ97 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 1ġ98 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 1 Fix badblocks Step 1: The value of "Current_Pending_Sector" attribute in "smartctl -A" command confirms the bad sector. The LBA counts sectors in units of 512 bytes starting at zero. # 1 Extended offline Completed: read failure 90% 217 0x016561e9

bad checksum corrupt save snes9x mac

Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error SMART Self-test log structure revision number 1 The smartctl command reports a badblock at Logical Block Address LBA = 0x016561e9 which in decimal number system is 23421417. This article proceeds through some examples of disk failure for different types of filesystem. The usage of this command will be clear as we proceed through this article. The smartctl performs SMART tasks and can be used to print SMART self-tests and error logs among other tasks such as support for polling TapeAlert messages from SCSI tape drives. Smartd is the deamon that polls the ATA and SCSI devices every 30 minutes (this value can be changed) and logs the SMART errors and changes in SMART attributes using SYSLOG interface. The smartmontools package provides two utilities: smartrd and smartctl. This tutorial describes the actions that can be taken when smartmontools detect and report some badblocks on hard disk running linux. The SMART stands for Self-Monitoring, Analysis and Reporting Technology. The SMART technology built into many storage devices (such as many ATA-3, later ATA, IDE and SCSI-3 hard drives) monitors the reliability of hard drive and can predict drive failures. These badblocks can be recovered if we are able to reach the exact location of that block. The badblocks in a storage device are the portions of the device that are not readable for some reason.









Bad checksum corrupt save snes9x mac